Procudt center

Double eccentric hard seal butterfly valve is a valve type widely used in many industrial fields. Its unique structural design gives it significant advantages in performance and reliability.

Waterproof hammer high-speed intake and exhaust valve is a kind of equipment used to prevent water hammer phenomenon, especially suitable for the pipeline system which is prone to sudden pressure change and impact in the water transmission pipeline. Its main functions include preventing a large amount of water from splashing, reducing the impact on the inside of the exhaust valve, extending the service life of the exhaust valve, and limitin

The double flange force transmission joint has short structure, reasonable design, reliable sealing, convenient loading and unloading, can compensate the axial displacement of the pipeline within a certain range, transmit the axial push and pull force, and has the functions of adjusting the maximum expansion amount and preventing the nozzle from loosening. It can be used instead of U-tube, bellows and other expansion joints, and is an ideal solution to the problems of pipeline installation and expansion.

The CF type single flange loose sleeve force transmission joint is an important connector used in the pipeline system, mainly used for the loose sleeve connection of pumps, valves and pipelines and other equipment. It consists of a loose sleeve expansion joint, a short pipe flange and a force transmission screw. It adopts a trapezoidal rubber sealing ring, is fastened by gland bolts, and uses rubber compression elastic deformation to achieve static sealing, effectively preventing medium leakage

Cone valve is a suitable for high head, large flow conditions, no vibration, no cavitation operation, continuous discharge flow control of new valve products. Due to the use of inverted cone plunger spool named, referred to as the cone valve. Because of its excellent energy dissipation effect, it is also called energy dissipation valve.

Cone valve is a suitable for high head, large flow conditions, no vibration, no cavitation operation, continuous discharge flow control of new valve products. Due to the use of inverted cone plunger spool named, referred to as the cone valve. Because of its excellent energy dissipation effect, it is also called energy dissipation valve. Cone valve in addition to the end of the channel is provided with a conical valve core, all the moving parts are set in the valve flow channel outside, so that the valve body internal flow is usually smooth, large flow and pressure drop loss is small, the entire working range will not produce cavitation and vibration, and in the small flow still has good flow control effect. The conical valve developed by our company has a fixed inverted conical structure. It is supported by hydraulic design and four guide wing blades used to reduce vibration. The flow rate is controlled by the front and back movement of the external movable casing. The valve body is respectively provided with metal-to-metal valve seats and supplementary soft sealing valve seats, which constitute a composite valve seat to ensure sealing performance. When discharged into the atmosphere, the water flow spreads at a wide cone angle and breaks down into a thin spray pattern, expending energy in the air. Usually according to the actual needs, can be required to control the water flow area, then install a different form of deflector at the outlet, which can not only mix the air with sufficient water, but also concentrate the flow. The results of the cone valve test showed no significant vibration, and the discharge coefficient was around 0.9 with or without the shroud when the fixed cone was fully open. ZF cone valve is mainly used in hydropower stations, reservoirs and urban water supply and drainage areas.

This series of knife gate valve is my company design and development of a compact structure, long life, safe and reliable new knife gate valve. This series of knife-shaped gate valve is divided into two types of open gate valve and dark gate valve. In the design and manufacture, many innovative structures are adopted. The strength and stiffness of key components are checked by finite element analysis software to ensure the stable and reliable performance of this series of knife-shaped gate valves. Especially suitable for pipeline system with large amount of sediment.

The Z45T stem wedge gate valve is a valve widely used in petroleum, chemical, pharmaceutical, electric power and other industries. It is mainly used for opening and closing of steam, water and oil media pipelines with nominal pressure ≤ 1.0MPa.

Z41T Rod wedge gate valve is a kind of valve that relies on medium pressure to press the sealing surface of the gate plate to the sealing surface of the valve seat on the other side, thus ensuring the sealing effect. Its compact structure, reasonable design, good rigidity, unobstructed passage, and low medium resistance. Sealing surface material is usually made of stainless steel and carbide, long service life. The gate of Z41T Ram wedge gate valve can be made into a whole, called rigid gate, or it can be made into a gate that can produce trace deformation to improve manufacturability and make up for the deviation in the processing process. This gate is called elastic gate

The anti-theft gate valve is a valve specially designed to prevent unauthorized use, mainly used in heating systems, oil fields and other places where resources need to be prevented from being embezzled.

Buried gate valve is a direct buried underground valve, mainly used in urban water supply, gas and industrial pipelines and other fields. They usually have the characteristics of maintenance-free, pressure-resistant, corrosion-resistant, etc., can be used for a long time without leakage, and reduce the construction requirements of the well chamber, thereby reducing the construction difficulty and engineering cost

Product overview Multi-function water control valve is installed in the high-rise building water supply system and other water supply system of the pump outlet, to prevent the media back, water hammer and water hammer phenomenon of intelligent valve. The valve has three functions of electric valve, check valve and water hammer eliminator, which can effectively improve the safety and reliability of water supply system. The technical principles of slow opening, quick closing and slow closing to eliminate water hammer are integrated. To prevent the generation of pump water hammer and stop pump water hammer. Just operate the pump motor opening and closing button, the valve can be automatically opened and closed according to the pump operating procedures, with large flow and small pressure loss. Suitable for valves below 600 caliber.

Z41X Rod Soft Seal Gate Valve is a high-performance valve with a variety of advantages, widely used in various industrial and civil fields

For a long time, the general gate valve used in the market is generally leaking or rusting. The elastic seat seal gate valve produced by our factory imported European high-tech rubber and valve manufacturing technology overcomes the defects of general gate valve such as poor sealing, elastic fatigue, rubber aging and rust. The elastic seat seal gate valve uses the compensation effect of elastic valve to produce trace elastic deformation to achieve good sealing effect. The valve has obvious advantages such as light opening, reliable sealing, good elastic memory and long service life, it can be widely used in tap water, sewage, construction, petroleum, chemical industry, instrument, medicine, textile, electric power, ship, metallurgy, energy system and other fluid pipelines as regulating and intercepting devices.

Double eccentric soft seal butterfly valve is a valve with unique design and excellent performance, which is widely used in various industrial fields. Its core features include double eccentric design and soft sealing structure, these designs make the valve in the sealing performance, ease of operation and service life outstanding.

Midline-type wafer butterfly valve is the preferred regular butterfly valve for clamping into the short distance between two pipe flanges.

Hydraulic control slow closing butterfly valve is currently our company's more advanced pipeline control equipment, mainly installed in the hydropower station turbine inlet, used as turbine inlet valve; or installed in water conservancy, electricity, water supply and drainage and other types of pumping station pump outlet. Replace the function of check valve and gate valve. When working, the valve and the pipeline host are equipped with the platform. According to the principle of hydraulic transition process, through the preset opening and closing procedure, the water hammer in the pipeline is effectively removed, the reliable cut-off of the pipeline is realized, and the safety of the pipeline system is protected.

Heating worm full bore welded ball valve Q361F(H)-25 DN50-500

Overview: Eccentric three-stage slow-closing non-return butterfly valve is a new type of check valve developed by our company on the basis of butterfly valve and the same type of check valve, which can realize three-stage closing. Performance characteristics: 1. The structure is simple and the non-return effect is good. 2. The slow closing system is less affected by the medium in the pipeline, and the adjustment and maintenance are simple.

Heating manual flange fully welded ball valve Q41F(H)-40 DN15-100

HH49X series micro-resistance slow closing muffler butterfly check valve is the latest product developed by our company. It integrates the advantages of many similar products and is introduced to the market with its unique design, which is quickly praised by the majority of users. Features: 1. Small size, light weight and unique structure. 2. The sealing surface is not affected by fluid, tight and reliable, wear-resistant, long service life.

1. Scope of application: heating system, district heating, industrial use, city gas, urban water supply. 2. Medium: water, air, oil and other fluids that do not chemically react with carbon steel. 3. Applicable temperature: Q341F type maximum applicable temperature: ≤ 200 ℃;Q341H type maximum applicable temperature: ≤ 300 ℃

Product introduction: H47X series products are the latest soft sealing double eccentric flange connection micro-resistance slow closing butterfly check valve developed by our company. It is mainly used in petroleum, chemical, food, medicine, textile, papermaking, water supply and drainage, metallurgy and energy systems as one-way valves to prevent medium countercurrent and destructive water hammer.

HC41X muffler check valve has two connection modes: flange connection and clamp connection. The valve flap is guided by the central axis at both ends of the inlet. It is flexible in opening and closing, accurate in positioning, and can be installed horizontally or vertically. The valve flap is spring-loaded, and its fast closing can effectively reduce water hammer pressure. The sealing surface adopts a combined sealing structure of O-ring elastic seal and metal hard seal, which has good sealing performance and no noise when closed. It also has the characteristics of small size, light weight, small fluid resistance, small structure length, fatigue resistance and long life. The valve is installed in the water supply and drainage, fire protection, HVAC system can be installed at the outlet of the pump to prevent backflow, and damage to the pump.

1. Scope of application: heating system, district heating, industrial use, city gas, urban water supply. 2. Medium: water, air, oil and other fluids that do not chemically react with carbon steel. 3. Applicable temperature: Q367F type maximum applicable temperature: ≤ 200 ℃;Q367H type maximum applicable temperature: ≤ 250 ℃

Heating gas fully welded fixed ball valve Q367F(H)-25

H44X(SFCV) series rubber flap check valve parts design is mainly composed of valve body, valve cover and rubber flap three main parts. The rubber flap in the valve is made of steel plate and steel rod for long switch life. H44X(SFCV) series rubber flap check valve adopts full flow area design, with small head loss and not easy to accumulate debris. Easy maintenance and other characteristics.

Heating gas fully welded fixed ball valve Q367F(H)-10/25/40/64 DN150-1000

1. Scope of application: district heating, refrigeration and heating system, city gas. 2. Medium: water, air, oil and other fluids that do not chemically react with carbon steel. 3. Applicable temperature: Q361F type maximum applicable temperature: ≤ 200 ℃;Q361H type maximum applicable temperature: ≤ 300 ℃

Integral welded ball valve, there will be no external leakage phenomenon. The valve seat is composed of carbonized Teflon sealing ring and spring, and has strong adaptability to pressure and temperature changes, and will not produce any leakage within the marked pressure and temperature range. The processing of the sphere is tracked and detected by an advanced computer detector, and the processing density of the sphere is high. The sealing ring is made of carbon C- PTFE with a content of 20 �rbon to ensure complete no leakage. The valve body is small, light in weight, beautiful in appearance and long in service life.

The standard welded filter ball valve is an important fluid control equipment

The S313 series retractors produced by our company are manufactured in national standards. They have a new generation of retractors with light weight, large compensation, simple structure and excellent sealing. They can effectively compensate the pipeline displacement caused by thermal expansion and contraction. And fracture. It can be used with various valves to make the valve loading and unloading more convenient and make your pipeline operation safer and more reliable.

1. Scope of application: heating system, district heating, industrial use, city gas. 2. Medium: water, air, oil and other fluids that do not chemically react with carbon steel. 3. Applicable temperature: Q361F type maximum applicable temperature: ≤ 200 ℃;Q361H type maximum applicable temperature: ≤ 300 ℃

BF(VSSJA-1) single flange limit expansion joint is composed of loose sleeve expansion joint and a limit short tube. The single-flange loose sleeve limit expansion joint is used to connect with the flange on one side and weld with the pipeline on the other. During installation, adjust the installation length between the two ends of the product and the pipeline or flange, tighten the gland bolts evenly diagonally, and then adjust the limit nut, so that the pipeline can freely expand and contract within the expansion range, lock the expansion amount, and operate stably.

Product features: 1. Small pressure loss: when fully open, the water loss is zero, the flow channel is completely unblocked, and the medium will not be deposited in the valve body cavity. 2, resistance to particle wear: V-shaped opening of the ball cap and the metal valve seat between the shear, in the closing process. Only at the last moment does the ball crown lean against the valve seat without friction. And the valve seat is made of wear-resistant nickel alloy, which is not easy to be washed and worn, so it is suitable for fiber, small solid particles, mud, etc. 3. Suitable for high flow rate media: straight-through flow channel, strong eccentric-crankshaft makes it suitable for high flow rate and no vibration.

SSJA-2(B2F) double-flange limit expansion joint is a high-performance pipe connection equipment. Its working principle combines multiple functions such as sealing, expansion compensation and limit protection to ensure the safe operation of the pipeline under different working conditions.

Fixed ball valve is a new generation of high-performance ball valve, suitable for long-distance pipelines and general industrial pipelines. Its strength, safety, and resistance to harsh environments have been specially considered in the design. It is suitable for various corrosive and non-corrosive media.

C2F type double flange joint is a new product connected to pumps, valves and other equipment and pipelines. They are connected by full bolts to make them become a whole and have a certain displacement, so that they can be adjusted according to the on-site installation size during installation and maintenance. When working, the axial thrust can be transmitted to the entire pipeline. This not only improves work efficiency, but also protects pumps, valves and other equipment.

The valve is the company combined with the performance characteristics of the hard seal screw valve, half ball valve, ball valve, a newly developed structure of the valve, is currently on the market cost-effective ball valve products, after users use high evaluation.

Brief installation instructions: 1. CF type single flange loose sleeve force transmission joint is suitable for connecting with flange while welding with pipe. C2F type double flange loose sleeve force transmission joint and CC2F type detachable double flange loose sleeve force transmission joint are suitable for connecting with flange on both sides. 2. The products have been assembled before leaving the factory. Just connect both sides of the product with the pipe or flange, and tighten the nut evenly diagonally.

The wafer butterfly valve is a common industrial pipeline valve, mainly used to control the fluid medium in the pipeline. Its characteristics include compact structure, small size, light weight, especially suitable for places with narrow space or short pipe spacing. The wafer type butterfly valve is connected between two pipe flanges through stud bolts, which is relatively easy to install and maintain.

Product overview: This product is used for the highest point on the sewage pipe or a place with closed air to exclude the gas in the sewage pipe to dredge the pipe. Make the pipeline run normally, if not installed this valve, the pipeline will appear closed air, so that the flow rate of sewage by air resistance, and even interrupted. Working principle: when the sewage in the pipe moves, the valve flap stops at the lower part of the fixed door frame. When the air is exhausted, the sewage enters the valve to float the ball first and pass it to the valve until it is closed. The naturally occurring gas inside the tube will be concentrated to the upper part of the tube to a considerable extent, and the valve hole will be discharged.

CARx Composite Exhaust Valve The valve body is barrel-shaped, and the internal parts of the valve include stainless steel float ball, lever and disc. The valve is installed at the outlet of the pump or in the water distribution pipeline to exclude the air in the pipe to improve the efficiency of the pipeline and the water pump. When negative pressure is generated inside the tube-once. This valve quickly sucks in outside air to prevent damage to the pipeline due to negative pressure. Composite exhaust valve for the highest point on the pipeline or a closed place, the gas in the tube to clear the pipeline, to achieve normal work. If the exhaust valve is not installed, the liquid flowing in the pipe will generate dynamic heat and cause gas to form a short circuit, which will make the water outlet capacity of the pipe fail to meet the requirements. Secondly, the pipe will have negative pressure when the pipe is running and the pump will stop, which will cause the pipe to vibrate or rupture. The exhaust (suction) valve quickly sucks air into the pipe to prevent pipe vibration or rupture. Its working principle is: When the water injection in the pipe starts, the valve flap is in the open position to perform a large amount of exhaust. When the air is exhausted, the valve is filled with water, the float rises and drives the valve flap to close, and the exhaust is stopped. When the water in the pipe is transported normally. If a small amount of air collects in the valve to a considerable extent, the water level in the valve drops, and the air is discharged from the small hole. When the water pump stops, the water in the pipe is empty or negative pressure is generated in the pipe. At this time, the plug head is quickly opened to inhale air to ensure the safety of the pipeline. Medium temperature: 0-80 ℃.

The adjustable pressure relief valve is a special valve installed on the water supply and drainage system pipeline of high-rise buildings to reduce the inlet pressure to a certain outlet pressure. The valve relies on its own energy to keep the outlet pressure stable at the set value, that is, the outlet pressure does not change due to the change of inlet pressure and flow rate. A self-cleaning filter screen is installed at the inlet of the valve control system to make the specific gravity larger by using fluid characteristics, larger diameter suspended particles will not enter the control system, to ensure that the system circulation unimpeded, so that the valve can operate safely and reliably. The system is sensitive and has a long service life.

The worm gear combination valve is a valve control device realized by worm gear transmission technology. It is mainly used to drive the opening and closing operation of the valve to ensure that the valve can operate smoothly and accurately during the opening or closing process. Worm gear combination valve is usually composed of two parts: worm gear box and valve. The worm gear box is the key component, which is responsible for transmitting power and controlling the action of the valve.

Installed in high-rise buildings, fire water supply systems and other water supply systems on the pipeline, when the pressure in the water supply pipeline exceeds the set pressure of the pressure relief valve, the pressure relief valve automatically opens for rapid pressure relief to protect the safety of the pipeline, and can also be used as a holding valve to ensure the water supply pressure upstream of the main valve. Can accurately maintain the same security set pressure, one and overpressure, pressure relief valve quickly open, timely pressure relief. Close smooth and reliable, eliminate the pressure after-wave.

200X pressure reducing valve is an intelligent valve that uses the energy of the medium itself to adjust and control the pipeline pressure. 200X pressure reducing valve is used for domestic water supply, fire water supply and other industrial water supply systems. By adjusting the decompression pilot valve, the outlet pressure of the main valve can be adjusted. The outlet pressure does not change due to changes in inlet pressure and inlet flow. The outlet pressure is safely and reliably maintained at the set value, and the set value can be adjusted as needed to achieve the purpose of decompression. The valve has accurate decompression, stable performance, safety and reliability, convenient installation and adjustment, and long service life.

Double eccentric butterfly valve, also known as high-performance butterfly valve, is the regulation and closure equipment on the water pipeline. It is mainly suitable for water plant, power plant, steel plant smelting, chemical industry, water source engineering, environmental facilities construction and other system drainage, especially suitable for water pipeline, as a regulation and closure equipment. Compared with the middle line butterfly valve, the double eccentric butterfly valve is more resistant to high pressure, has a longer life and good stability.

500X pressure relief/holding valve is composed of main valve, pilot valve, needle valve, ball valve, micro filter and pressure gauge, hydraulic control pipe system. The use of hydraulic automatic operation, that can be used as a pressure relief valve can also be used as a holding valve. When the pressure relief valve is used, it can maintain the pressure of the water supply circuit below the set safety value and maintain the upstream water supply pressure of the main valve o. Its working principle, when the pilot valve is adjusted to the pressure relief state, the water flows to the outlet through the needle valve, the main valve control room, ball valve A, pilot valve and ball valve B, and the main valve is open at this time. When the inlet pressure exceeds the safety value set by the pilot valve, the pressure relief pilot valve will automatically open, and part of the water will be released through the ball valve c to relieve the pressure of the pipeline.

This product is widely used in urban water supply and drainage, metallurgy, petroleum, chemical, irrigation, electric power, textile and other industries on water treatment machine buildings to achieve flow and liquid level control, is one of the important equipment for water supply and drainage and sewage treatment.

Telescopic butterfly valve is a kind of valve that uses circular butterfly plate as opening and closing parts and rotates with the valve stem to open, close and adjust the fluid channel. It is used as a component to realize the on-off and flow control of the pipeline system.

This product is widely used in urban water supply and drainage, metallurgy, petroleum, chemical, irrigation, electric power, textile and other industries on water treatment machine buildings to achieve flow and liquid level control, is one of the important equipment for water supply and drainage and sewage treatment.

A new type of valve has the characteristics of small size, light weight, flexible and convenient operation, and is widely used in chemical, petroleum, pharmaceutical and other production departments. Its design features include small size, light weight, flexible and convenient operation, and it is suitable for water-gas-oil pipeline systems in the oil and gas industry with nominal pressure PN≤ 16MPa and other pipelines as regulating and intercepting devices

Instructions for ordering: 1. Indicate the model, caliber and whether the hoist is manual or electric; 2. Indicate the distance from the gate center to the hoist; 3. Indicate the installation form and light and dark rod; 4. Paint color and packaging requirements; 5. Please indicate if you have any special requirements. Instructions for ordering: 1. Indicate the model, caliber and whether the hoist is manual or electric; 2. Indicate the distance from the gate center to the hoist; 3. Indicate the installation form and light and dark rod; 4. Paint color and packaging requirements; 5. Please indicate if you have any special requirements.

JM744X,JM644 diaphragm type hydraulic, pneumatic quick-opening mud valve, is a kind of hydraulic source or pneumatic source actuator angle type cut-off valve. It is usually installed in rows on the outer wall of the bottom of the sedimentation tank to remove the sediment and dirt from the bottom of the tank. The valve is divided into two chambers by nylon reinforced rubber diaphragm, which is connected to hydraulic or pneumatic source, and controlled by electric or manual two-position four-way reversing valve to realize rapid mud discharge. The valve will replace the piston diaphragm, no movement friction, more suitable for mud and other granular media. Greatly improve the service life of the valve.

JM744X hydraulic and pneumatic JM644x diaphragm type quick-opening mud valve adopts double-chamber diaphragm transmission mechanism instead of piston type mechanism, which has no movement wear and long service life. The inside of the diaphragm is made of folded composite material. Greatly improves the elongation of the diaphragm and prolongs the service life of the diaphragm during the opening and closing of the valve. Not easily broken. And can withstand higher pressure. Stay with electric two-position four-way valve or manual two-position four-way or to the valve centralized control, easy to operate, flexible valve opening and closing. This valve is mainly installed outside the bottom wall of the sedimentation tank to exclude the sediment and dirt at the bottom of the tank.

Multifunctional piston is a new type of valve, with a variety of adjustment and control functions. The main functions are: water level control, decompression, check, pressure relief, flow control, and drainage at the bottom of the dam. The maximum inlet and outlet pressure difference can reach 40 kg/cm. Especially in the large diameter, high pressure and large pressure conditions show its superior adjustment and control function.

Cone valve is a suitable for high head, large flow conditions, no vibration, no cavitation operation, continuous discharge flow control of new valve products. Due to the use of inverted conical plunger spool named, referred to as the cone valve. Because of its excellent energy dissipation effect, it is also called energy dissipation valve. Cone valve in addition to the end of the channel is provided with a conical valve core, all the moving parts are set in the valve flow channel outside, so that the valve body internal flow is usually smooth, large flow and pressure drop loss is small, the entire working range will not produce cavitation and vibration, and in the small flow still has good flow control effect. The conical valve developed by our company has a fixed inverted conical structure. It is supported by hydraulic design and four guide wing blades used to reduce vibration. The flow rate is controlled by the front and back movement of the external movable casing. The valve body is respectively provided with metal-to-metal valve seats and supplementary soft sealing valve seats, which constitute a composite valve seat to ensure sealing performance. When discharged into the atmosphere, the water flow spreads at a wide cone angle and breaks down into a thin spray pattern, expending energy in the air. Usually according to the actual needs, can be required to control the water flow area, then install a different form of deflector at the outlet, which can not only mix the air with sufficient water, but also concentrate the flow. The results of the cone valve test showed no significant vibration, and the discharge coefficient was around 0.9 with or without the shroud when the fixed cone was fully open. ZF cone valve is mainly used in hydropower stations, reservoirs and urban water supply and drainage areas.

Sediment-proof butterfly valve is a new product developed by our company on the basis of double eccentric flanged butterfly valve, which is aimed at the problems of easy failure of valve axial seal and short applicable life for pipeline system with large sediment. Features: 1, the butterfly valve has the advantages of double eccentric flange butterfly valve. 2, the use of anti-sediment sealing structure, to ensure that the axial non-seepage, no corrosion, no stuck dead and other phenomena, to extend the service life of the valve.

The butterfly valve is suitable for high temperature, high pressure, fire prevention, insulation and other pipelines for opening and closing or adjusting the medium. Its main features are as follows: 1. Compact structure, small size, light weight, flexible operation and convenient use. 2, the use of three-dimensional eccentric elastic or multi-level hard seal structure, its sealing performance is reliable to achieve zero leakage. 3. This valve has no flange, which brings great convenience and beauty to the insulation wrapping of the pipeline. 4. It has the characteristics of high temperature and high pressure resistance, corrosion resistance and wear resistance.

Three eccentric hard seal butterfly valve series products, the Department of our company developed a long life, energy-saving butterfly valve. The product conforms to the national standard JB/T8527 (metal seal butterfly valve),GB/T13927 (general valve pressure test) and other relevant standards of the valve. This product consists of valve body, butterfly plate, sealing ring, transmission mechanism and other major components. Its structure is designed with three-dimensional eccentric principle. Elastic seal and hard and soft multi-layer seal compatible processing new technology, so that the butterfly valve in the operation of the work, reduce its torque force, to save effort, energy saving function. So as to ensure the overall corrosion resistance, high temperature resistance, wear resistance reliability.

Multi-function water control valve is installed in the high-rise building water supply system and other water supply system of the pump outlet, to prevent the media back, water hammer and water hammer phenomenon of intelligent valve. The valve has three functions of electric valve, check valve and water hammer eliminator, which can effectively improve the safety and reliability of water supply system. The technical principle of stage opening, quick closing and slow closing to eliminate water hammer is integrated. To prevent the generation of pump water hammer and stop pump water hammer. Just operate the pump motor opening and closing button, the valve can be automatically opened and closed according to the pump operating procedures, with large flow and small pressure loss. Suitable for valves below 600 caliber.

Wireless remote transmission intelligent water meter is installed in the water meter wireless remote transmission module, through pulse/photoelectric sampling, is a wireless automatic meter reading system in the electromechanical conversion of zero error intelligent remote transmission water meter. Wireless remote water meter adopts LoRa modulation technology to send and receive data wirelessly, which has the characteristics of ultra-low power consumption, strong performance and long transmission distance. At the same time, it has high anti-interference and high reliability. It greatly surpasses the existing GFSK modulation module in stability, anti-interference ability and receiving sensitivity. It solves the problem that the traditional design scheme can not take into account the long-distance transmission, anti-interference and low power consumption at the same time, and becomes the choice of wireless applications with long-distance transmission and high reliability requirements. Meter can realize automatic maintenance, do not need construction wiring, do not need professional maintenance, easy to install and use

Wireless remote transmission intelligent water meter is installed in the water meter wireless remote transmission module, through pulse/photoelectric sampling, is a wireless automatic meter reading system in the electromechanical conversion of zero error intelligent remote transmission water meter. Wireless remote water meter adopts LoRa modulation technology to send and receive data wirelessly, which has the characteristics of ultra-low power consumption, strong performance and long transmission distance. At the same time, it has high anti-interference and high reliability. It greatly surpasses the existing GFSK modulation module in stability, anti-interference ability and receiving sensitivity. It solves the problem that the traditional design scheme can not take into account the long-distance transmission, anti-interference and low power consumption at the same time, and becomes the choice of wireless applications with long-distance transmission and high reliability requirements. Meter can realize automatic maintenance, do not need construction wiring, do not need professional maintenance, easy to install and use

GJQ(X)-DF single-sphere flexible rubber joint diameter, length and displacement parameter table-description: ① please indicate the structural length and connection size of the standard when ordering. ② If the relevant parameters of the flexible rubber joint are not within the scope of the above table, please indicate that the company can design and manufacture on its behalf.

Convex (flat) plate flat welded steel pipe flange is a common type of flange, widely used in the connection of medium and low pressure vessels and pipelines. Its design is simple, easy to manufacture and install, suitable for low pressure rating, pressure fluctuations, vibration and shock is not serious pipeline system.

This product is widely used in urban water supply and drainage, metallurgy, petroleum, chemical, irrigation, electric power, textile and other industries on water treatment machine buildings to achieve flow and liquid level control, is one of the important equipment for water supply and drainage and sewage treatment.

Globe valve, also known as cut-off valve, is a forced seal valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface does not leak.

This series of anti-corrosion butterfly valve is a new type of anti-corrosion butterfly valve developed by our company on the basis of eccentric vermicular valve according to the current market demand. This type of valve is a new type of anti-corrosion butterfly valve with advanced structure, safe and reliable, and long service life.

GJQ (X)-SF Double Spherical Flexible Rubber Joint Diameter, Length and Displacement Parameters Table-Description: 1 Please indicate that the structural length and connection size are standard when ordering. ② If the relevant parameters of the flexible rubber joint are not within the scope of the above table, please indicate that the company can design and manufacture on its behalf.

Storage tank hydraulic control slow-closing check butterfly valve is a new product developed by our company. At present, the valve is my company's latest generation of hydraulic control butterfly valve, it has the function of both gate valve and check valve, is a kind of pre-set procedures, divided into two stages of quick and slow closing action to eliminate water hammer on the management system network damage the ideal control equipment.